10 Bryant Non-NEMA Twist Locking Connector Female Plugs 30A 120/208V 3ØY 3433

Description

Fruit Ridge Tools, LLC
Our eBay Store
Contact Us
Add to Favorite Sellers
10 Bryant Non-NEMA Twist Locking Connector Female Plugs 30A 120/208V 3ØY 3433
Product Details
Quantity in Lot:
10
Brand:
Bryant
Part Number:
3433
Color:
White
Type:
Locking Connector
Phase (if applicable) :
3 Phase Y
Poles:
4
Wires:
4
NEMA Number:
Non-NEMA
Amperage:
30A
Voltage:
120/208V
Grade:
Industrial Grade
Ground:
Non-Grounding
10 Bryant 3433 locking connectors. Industrial Grade, Non-NEMA, 4-pole, 4-wire, non-grounding, rated 30A 120/280V 3-phase Y. Cord grip range: .590"-1.150". Terminals accommodate #18-#10 AWG. Bulk packed loose in carton. Features include:
One-piece, rivetless, .035" thick brass contacts offer enlarged contact surface area, low heat, and long life
Cleat on contacts cuts oxidation when plug blade enter contact surface
Internal wiring chambers isolate individual conductors to prevent flashover, arcing, and stray strands of wire
Deep-funnelled, large rectangular-shaped chamfered wire wells guide conductors into termination position
Transparent wiring chambers provide a means of visual inspection of conductors and terminals
Wire clamps move within individual chambers to provide positive crimp lock without cutting wire strands
Color-coded terminal screws
Molded-in strip gage provides correct measurement for proper strip length of conductor
Captive terminal screws eliminate nuisance dropping and searching for missing screws
Positive crimp contact plate bundles stranded wire maximizing wire/clamp surface contact
Combination #10-32 deep slotted/ Phillips brass screws easily torque to 10-14 in.-lbs.
Super tough nylon body resists damage from severe impact, abrasion, and chemical attack
Wiring module keyed to body for easy assembly. Deep slotted/Phillips steel screws secure wiring module (12-14 in.-lbs.) to body
Ergonomically designed fluted body with radial gripping ridge creates an ideal surface for gripping, turning, and pulling
NEMA configuration, agency certifications, and device rating are molded on front of device to assist with identification
External cord clamp utilizes deep slotted/Phillips steel screws that are backed out and positioned inside shrouded pockets to prevent slippage of screwdriver blade when tightening cord clamp screws
External clamp accepts wire mesh grips. Strain relief insert is easily removed without removing cord clamp to accommodate larger cords. Cable gage identifies maximum cord size allowed with strain relief insert
This is New Old Stock and is returnable for any reason. (SKU # BRY3433-10PK; Weight: 3.65 lbs.)