Hubbell Locking Connector Watertight Shroud L21-20R 20A 120/208V 3� HBL2513SW

Description

Fruit Ridge Tools, LLC
Our eBay Store
Contact Us
Add to Favorite Sellers
Hubbell Locking Connector Watertight Shroud L21-20R 20A 120/208V 3� HBL2513SW
Product Details
Quantity in Lot:
1
Brand:
Hubbell
Part Number:
HBL2513SW
Color:
Black/White
Type:
Locking Connector
Phase (if applicable) :
3 Phase Y
Poles:
4
Wires:
5
NEMA Number:
L21-20R
Amperage:
20A
Voltage:
120/208V
Grade:
Industrial Specification Grade
Ground:
Grounding
Hubbell HBL2513SW watertight locking connector with Safety Shroud. Industrial Grade, NEMA L21-20R, 4-pole, 5-wire, grounding, rated 20A 120/208V 3-phase. Cord grip range: .350"-1.150". Terminals accommodate #16-#8 AWG. Each is individually packaged; packaging may differ from photo. Features include:
Sealing gland and themoplastic guard assure sealing when fully connected
Shroud virtually eliminates bent and broken plug blades
Shroud provides protection for personnel by reducing chance of inadvertent contact with blades when connecting or disconnecting energized devices
Shroud reduces exposure to arcing when connecting or disconnecting under load; extends life of mating receptacles by eliminating damage caused by insertion of bent blades
Shroud complies with California Code of Regulation which requires shrouding for devices exceeding 300 volts
Shroud lockout/tagout hole allows compliance to OSHA regulation 29 CFR 1910.147
Shroud allows engagement with Mechanical Interlock Enclosure which virtually prevents make and break under load
Alignment arrows on shroud with lock and unlock symbols provide a visual indication that devices are properly connected; external keying on shroud allows quick mating of devices
Solid brass blades are fitted and held tightly and securely in place
Dead front construction prevents accidental contact with internal parts
Internal wiring chambers isolate individual conductors to prevent flashover, arcing, and stray strands of wire
Deep-funnelled, large rectangular-shaped chamfered wire wells guide conductors into termination position
Transparent wiring chambers provide a means of visual inspection of conductors and terminals
Wire clamps move within individual chambers to provide positive crimp lock without cutting wire strands
Color-coded terminal screws
Molded-in strip gage provides correct measurement for proper strip length of conductor
Terminal identification letters on back cover ensure quick and accurate termination
Captive terminal screws eliminate nuisance dropping and searching for missing screws
Positive crimp contact plate bundles stranded wire maximizing wire/clamp surface contact
Combination #10-32 deep slotted/ Phillips brass screws easily torque to 10-14 in.-lbs.
Super tough nylon body resists damage from severe impact, abrasion, and chemical attack
Wiring module keyed to body for easy assembly. Deep slotted/Phillips steel screws secure wiring module (12-14 in.-lbs.) to body
Ergonomically designed fluted body with radial gripping ridge creates an ideal surface for gripping, turning, and pulling
NEMA configuration, agency certifications, and device rating are molded on front of device to assist with identification
External cord clamp utilizes deep slotted/Phillips steel screws that are backed out and positioned inside shrouded pockets to prevent slippage of screwdriver blade when tightening cord clamp screws
External clamp accepts wire mesh grips. Strain relief insert is easily removed without removing cord clamp to accommodate larger cords. Cable gage identifies maximum cord size allowed with strain relief insert
This is New Old Stock and is returnable for any reason. (SKU # HUBHBL2513SW-EA; Weight: 0.9 lbs.)